951 -734 -1935


951 -734 -1935



Hand or motor operated

Machine calibrated and certified to meet mil spec. requirements

High speed micro processor digital read out with large LCD display with optional RS-232 output

Tension load cell with +/- 2% accuracy up to 10,000 lbs.

Knurl grips with free rotating clamp handles. By pushing in center handles, handles can be set for 1/4” turn lock or unlock.

Fast return knob, allows operator to pull knob back and rapidly turn knob for reset or pull position

Easy load of coupons

Motor operated models includes 1/4 HP 90 V.D.C. gear motor, 180 RPM with right angle drive and SCR speed reducer. Forward and reverse operation with Micro E/S cut-outs.

Unit is portable - Weight: 28 lbs. 110 V.A.C. input

Measurements: 7” x 7” x 20” long

Capacity ranges 500 - 1,000 - 2,000 - 3,000 - 5,000 lbs. For 10,000 lb. capacity, order Janda Model 3020-10-H

Motor—Hydraulic operated only

Taper lock knurl grips with positive lock and release handles 5 position upper section vertical adjustment in 5” increments
Adjustable volume speed control

Approximate Weight: 360 lbs. 110 V.A.C. (15 amp input)

Note: Capacity ranges 5,000 - 20,000 lbs

JANDA Model 3020-5-H – Hand operated

JANDA Model 3020-5-M – Motor operated

JANDA MODEL 300TT Vertical Tensile Tester