JANDA J800 CONTROL
THE JANDA J800 CONTROL SPECIFICATIONS:
The Weld Controller consists of the Timer combined with additional components - Firing Module, Power Supply and Contactors installed in control box.
- Supply Voltage: 24 VDC
- Supply Current: <200 mA (no outputs on)
- Synchronization Signal: 12-37 VAC or 110-480 VAC
- Line Frequency: 50 or 60 Hz (Auto Detected)
- Number of Combined AFIO Digital Inputs/Outputs: 16
- Input Requirements: 24 VDC, <10 mA
- Digital Output Rating: 24 VDC, <500 mA
- WELD OUT Output: 5kHz; 1:10 Mark/Space 24V
- Size: 8''W x 16''L x 14''H
Operates with 24V, DC Supply
Up to 16 Welding Transformers (simultaneous or cascade) on a single phase
Constant Current Feedback
Frequency Auto Detect as 60Hz/50Hz
16 Total 24 VDC inputs and 24 VDC outputs plus weld on/off
1 to 99 schedules
Chaining weld schedules, with or without wait
Half Cycle Welding
Configurable for: Non-repeat, Spot, Repeat Spot, Roll-Spot Seam and Butt Weld
3 Programmable Weld Intervals - Upslope, Pulsation and Downslope
2-stage Foot Switch
Retraction Function
Weld Schedules & Configuration Transferable via USB Flash Drives
Counter with Configurable Lock-Out
Made in America
The JANDA J800 weld control offers the reliability that results from its simple design. This multi-functional controller is a compact, robust unit providing basic control for resistance welding. The simple to use touch screen LCD display provides a summary of the weld schedule at a glance and is quick and simple to program.
For additional simplicity JANDA offers two other user interfaces:
JANDA’s 3BH4 user interface for the simple programming of only the basic functions required for your application, including: Squeeze – Weld -Hold – Off Time – Repeat/No Repeat and Weld/No Weld.
For those that have Intertron controls we also offer the Intertron 108 interface.
